Eleven Rack Firmware Update Version 1.0.2

What's New in Firmware Version 1.0.2

• Fixed LCD display freezing when receiving multiple MIDI program and controller messages simultaneously
  
• Enabled Digital Input when Eleven Rack is using internal clock
  
• Fixed unwanted converter noise artifacts
  
• Fixed unwanted EQ quantization noise
  
• Added new display mode: Rig Volume Controls
  
• Added new User Option: Persistent Volume Pedal Control
  
• Added new User Option: Volume Knob can know control Main Volume, Output to Amp Levels or combination of both. Also provided Main & Headphone Mute controls.
  
• Added new User Option: Cab Resonance when Cab is bypassed
  
• Added new User Option: MIDI CC Reference Chart
  

1. Press the Edit/Back button to access Rig View.
2. Use the Scroll wheel to highlight the icon labeled METERS.
3. Turn the illuminated knob under the display to select the input, output or Eleven Rack USB stream you want to meter.
4. Two bar-style meters show relative signal level with clip indicators.
5. The SW1 button (labeled CLEAR) will illuminate red if clipping occurs. Press SW1 to clear the clip indicators.

• Previously, when Sync was enabled on a time-based effect such as a delay or chorus, any Time or Rate controls were temporarily deactivated. They could then be reactivated by turning the Sync control to Off.
  
• Now, adjustments to either the Sync or Time/Rate controls will override the setting of the other control automatically.
  

• When only 1 of the 2 Outputs to Amp is configured to get its signal from the Rig Output, the stereo Rig Output signal is now summed to mono. The Main Outputs will continue to output the stereo Rig Output signal.
  

• When set to "Rig Output No Cab", the global cab bypass would not persist if Eleven Rack was rebooted.
  

• With THRU engaged, the setting would not persist if Eleven Rack was rebooted.
  

• Fixed FINE control resolution with Expanded Delay (DELAY+) mode engaged.
  
• Miscellaneous cosmetic U/I fixes and enhancements.
  
• Retail Demonstration Mode added.
  

Updating your Eleven Rack to Firmware Version 1.0.2

• Press and hold the Edit/Back button to access the User Options menu.
  
• Once the User Options menu appears, use the Scroll wheel to highlight "Firmware Version" and press the SW1 button, which is labeled SELECT.
  
• If the displayed firmware version is "510" or "1.0.1", you should run this updater.
  
• If the displayed firmware version is v 1.0.2 or higher, you do not need to run this updater.
  

• Update for Windows Vista (KB932406)
  

1. Power on your Eleven Rack

2. Connect Eleven Rack to your computer.

The computer must have Eleven Rack drivers installed for the updater to function. If the computer does not have Eleven Rack drivers installed, go to the support pages at www.digidesign.com to download the Eleven Rack driver installer.

3. Disconnect or turn off any monitors or amplifiers connected to Eleven Rack.

4. Make sure Pro Tools is NOT running. If Pro Tools is running, Quit or Exit the application before running this updater.

5. Run the updater utility on your desktop:

• On Mac, double click the file "Digidesign Eleven Rack Updater".
  – or –
  
• On Windows, double click the file "Digidesign Eleven Rack Updater.exe".
  

6. Follow the on-screen instructions.

7. Wait until the update is complete before disconnecting Eleven Rack from the computer or powering down Eleven Rack.